Diy Double 55 Gallon Aquarium Stand
Introduction
Having an aquarium in your home is a great way to bring life and color to your living space. But, finding the perfect aquarium stand that is both functional and aesthetically pleasing can be a challenge. In this article, we will show you how to build a DIY double 55-gallon aquarium stand that is sturdy, affordable, and customizable to your needs.
Materials Needed
Before getting started, you will need the following materials:
- 4 - 4x4x8 posts
- 4 - 2x4x8 boards
- 4 - 2x4x10 boards
- 2 - 2x6x10 boards
- 1 - 4x8 sheet of plywood
- 1 - box of 3-inch wood screws
- 1 - box of 2-inch wood screws
- 1 - box of 1-inch wood screws
- Wood glue
- Sandpaper
- Stain or paint (optional)
Step 1: Cut the Wood
Using a saw, cut the 4x4 posts into 4 equal pieces that are 33 inches long each. Cut the 2x4 boards into 8 equal pieces that are 33 inches long each, and 4 equal pieces that are 20 inches long each. Cut the 2x6 boards into 4 equal pieces that are 48 inches long each. Cut the plywood into a 48x96 inch piece, and then cut it into two 48x33 inch pieces and two 20x33 inch pieces.
Step 2: Assemble the Frame
Using the 3-inch screws and wood glue, assemble two rectangular frames using the 4x4 posts and 2x4 boards. Attach two of the long 2x4 boards to two of the 4x4 posts using the screws and glue. Repeat this step for the second frame.
Step 3: Connect the Frames
Using the 2-inch screws and wood glue, connect the two frames together by attaching the short 2x4 boards between the frames at the top and bottom. Make sure the frames are level and square before attaching the boards.
Step 4: Add the Cross Braces
Using the 2x4x10 boards, cut two pieces that are 48 inches long each. Attach them diagonally between the frames using the 3-inch screws and wood glue. This will add stability to the stand.
Step 5: Add the Shelf Supports
Using the 2x4x10 boards, cut four pieces that are 20 inches long each. Attach them vertically between the frames, evenly spaced, to support the shelves. Use the 2-inch screws and wood glue.
Step 6: Add the Shelves
Using the 1x33x48 inch plywood pieces, attach them to the shelf supports using the 1-inch screws and wood glue. Repeat this step for the second shelf using the 20x33 inch pieces.
Step 7: Sand and Finish
Sand the entire stand with sandpaper to remove any rough edges or splinters. Stain or paint the stand to match your décor, if desired.
Conclusion
Building your own DIY double 55-gallon aquarium stand is a great way to save money and customize your aquarium setup to your specific needs. Follow these steps and you'll have a sturdy, functional stand in no time!